全部原厂设备及配件 敢于承诺
燃烧率达 99% 使用更节能
全自动运行检测 无需人工看守
常年连续使用 故障率极低
电话购买
货到付款
正规代理
保证原装
电话购买
TF834.3/836.3 - Oil Burner Safety Control For 1- or 2-stage oil power burners up to 30kg/h capacity with or without oil preheater and intermittent operations. Flame detection: - Photoresistor MZ 770 S - Infrared-flicker detector IRD 1010 - UV solid state sensor UVD 970 A special contact in the control unit short-circuits the thermo-switch of the oil preheater as soon as the burner is operating and the flame signal is present. Therefore interruption of the burner due to decreasing oil temperature (e.g. in case of high oil flow) can be prevented. If the control box goes into lock-out mode, the oil preheater power supply is also disconnected.
| TF834.2 | 1-stage operation |
| post-ignition time ca. 20 sec. | |
| low voltage protection according to EN230 | |
| TF834 E.3 | 1-stage operation |
| no post-ignition | |
| low voltage protection according to EN230 | |
| TF836.3 | 2-stage operation |
| post-ignition time 2-4 sec. | |
| low voltage protection according to EN230 |
暂无
暂无
2018-04-18
2018-03-12
2018-03-12
2018-03-05
2018-03-05
2018-03-05
2018-02-07
2018-02-07
展示工程现场，您知道我们更专业
